Product Description:

Cement resistors are made by winding the resistance wires on the alkaliless ceramic cores,then coated with noncorrosive, heat-proof and humidity-proof material. Cement type is the one with special flameproof cement stuffed in the ceramic case.

Features

1. Ceramic potting, greater safety.

2. There are two kinds of core wjich woundwire and oxide.

3. High power, longer load life under large load.

4. Wind resistance range

5. excellent heat resistance, resistance temperature coefficient is small, a linear change.

6. resistance to short time overload, low noise, resistance has not changed year after year.

7. Explosion-proof performance, and play a protective role

8. porcelain rod winding and then welded joints, the system made a precise resistance and extend the life.

Construction:

Ceramic core : High alumina ceramic is used.

Resistor element :The resistor element shall consist of metal oxide film or Resistance wire

Terminal : Tinned iron cap.

Connection : The lead wire,which is plated with solder,shall be mounted to the caps by welding process.

Lead wire:Soldered or tinned annealed wire.

Silicon cement : Silicon resin is used. Accord with UL-94V-0 Nonflammable specification

Ceramic case : High thermal conductivity

Applications:

Complete insulation suitable for printed circuit boards,Power supplies ,Voltage dividers ,Motor controllers ,Automotive applications ,Power electronics circuits.

Specification and Dimension: