PU - solution is a two component, room temperature, curing system. After curing, the layer has excellent flexibility, tear resistance, abrasion resistance and flame retardance,PU solution also called conveyor belt repair glue.

●To Repair conveyor belt longitudinal rips, holes and surface damages.

●To Repair rubber rollers, cans and other rubber products.

 

 

●Use a hand held buffing machine to buff the surface to be repaired.

●Clean the repair surface with a clean brush and ensure all rubber dust from buffing is removed.

●Open the packet of Solid Powder and insert contents into the bottle marked Cleaning Solution.

●Shake vigorously for a few seconds and then pour a small quantity onto the belt surface. Brush over the entire surface to be repaired.

●Wait until the entire surface is dry.

●Pour the contents of the bottle marked Part B completely into the bottle marked Part A.

●Immediately stir well for 30-60 seconds.

●After stirring, or, when the can starts to warm up, pour the solution onto the repair area as soon as possible, especially when the ambient temperature is higher than 20°C.

●After pouring, smooth and level the surface using a scraper. Ensure it is the same level as the mother belt.

●Allow the solution to dry completely. Depending on the temperature it may take a few hours.

●Once the surface has hardened, the belt can be put back in to operation.

 

 

1. PACKAGE CAN BE BLANK PACKAGE

2. QUANTITY LARGER(MORE THAN 500SETS, CAN BE USE CLIENT'S LOGO)

3. Shelf Life 12 months

 

 

●When the temperature is below 0°C, a halogen lamp should be used to heat the surface of the solution.

●Be sure to stir well to ensure complete curing of the material.

●Once opened, Part A and Part B must be used immediately.

●Contents cannot be stored for later use.

●This product is non-flammable.

●Material must be stored in a cool dry place.

 

 

 

 

"Huao" brand conveyor belt repair glue is known as high quality, long durability, safety, easy-application. "Huao" series products include cold bond adhesives, quick repair glues, hot splicing joints tie gum, cover sheet, pulley lagging rubber sheets, sealing skirt board covering nearly all the materials necessary for conveyor belt reparation. The products have been exported to more than 50 countries and regions all over the world.

 

 

The company owns advanced testing instrument produced by Taiwan Gotech Testing Machines Co., Ltd. and Harbin Hapro Electrical Technology Co., Ltd., including DIN wear tester, double-station belt fatigue tester, etc.

Good equipment is the guarantee of making high quality conveyor belt repair glue

 

 

 

 

http://www.betopconveyorcare.com/